Articles
I’m planning to make concrete during the cold winter months. Is there anything I should consider?
Concrete and concrete sealer needs heat to cure. Concrete will generate its own heat through chemical reaction but if the ambient temperature is too low then this self-generated heat will be much lower. As a consequence, the curing will slow … Continued
What material is suitable for cut-outs?
Cutouts in worktops or countertops have exposed edges by their very nature. Depending on the purpose of the cut-out those edges may be visible when the project is complete (e.g. around an under-mounted sink) or hidden (e.g. tap holes and … Continued
What is the best way to mix Concrete Lab concrete products?
The first thing to say is NOT BY HAND! Our concrete products need to be mixed thoroughly and the only way to do this is mechanically. The second point is a standard cement mixer, the type you see on a … Continued